Ruckard Scalping 03

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © ruckard

//@version=4

// Current version: v20210617 ( A001 )
// Tradingview Public description - BEGIN
// 
// This is 'Ruckard Scalping 03' strategy. It is written using 'Zignaly Tutorial' strategy as a base.
//
// 
// It was originally tested at SXPUSDT pair, 1m (1 minute) timeframe and 10x leverage.
// The strategy applies many substrats.
// [B]Substrat 01 (SS01)[/B] : We apply 2 DCAs levels:
// [LIST]
// [*] DCA Level 1: When price is 1.00% different (in opposite direction to the position side) to position price (DCATargetPercentage1=1.00) then 100% of the position (DCAAmountPercentage1=100) is rebought.
// [*] DCA Level 2: When price is 1.51% different (in opposite direction to the position side) to position price (DCATargetPercentage2=1.51) then  50% of the position (DCAAmountPercentage2=50) is rebought. Note: This means 100% at 2% in other systems.
// [/LIST]
// [B]Substrat 02 (SS02)[/B] : Too fast high DCAs close the position.
// [B]Substrat 03 (SS03)[/B] : 1.5 USDT initial real investment
// [LIST]
// [*] 1.50 USDT initial real investment. Later on the real investment should be 1% of total capital.
// [*] At 10x leverage that means 15 USDT investment.
// [*] So that 50% of it can be rebought ( 7.5 USDT) because that's higher than the minimum in Binance (5 USDT).
// [*] That also means the strategy needs to manage its capital internally to meet this requirement.
// [/LIST]
// [B]Substrat 04 (SS04)[/B] : Start date and hour setting.
// [B]Substrat 05 (SS05)[/B] : Use 'TradingView only' integration as much as possible. Final stop loss should be hybrid though.
// [B]Substrat 06 (SS06)[/B] : Both long and short sides are supported.
// [B]Substrat 07 (SS07)[/B] : If the strategy detects an opposite side opportunity the current side is not closed as it happens with the default Zignaly strategy. That way we might avoid false price direction changes.
// [B]Substrat 08 (SS08)[/B] : (Optional) If position price is not 0.30% greater than EMA30 in less than 60 minutes and no Trailing Stop is on then exit the position.
// [B]Substrat 09 (SS09)[/B] : Entry trigger
// [LIST]
// [*] If in the last 30 minutes there is a 5% (or higher) price drop then we enter in long.
// [*] If in the last 30 minutes there is a 5% (or higher) price bump then we enter in short.
// [/LIST]
// [B]Substrat 10 (SS10)[/B] : -10.00% Stop Loss
// [B]Substrat 11 (SS11)[/B] : Take profit at 1% of 50% of position. The 50% left of the position will be exited based on Stop loss based on candles method.
//
// [B]SETTINGS[/B]
// [B]__ SETTINGS - Capital[/B]
// [LIST]
// [*] (CAPITAL) Capital quote invested per order in USDT units {100.0}. This setting is only used when '(ZIG) Provider type' is set to 'Signal Provider'.
// [*] (CAPITAL) Capital percentage invested per order (%) {25.0}. This setting is only used when '(ZIG) Provider type' is set to 'Copy Trader Provider'.
// [/LIST]
// [B]__ SETTINGS - Misc[/B]
// [LIST]
// [*] (ZIG) Enable Alert message {True}: Whether to enable alert message or not.
// [*] (DEBUG) Enable debug on order comments {True}: Whether to show alerts on order comments or not.
// [*] Number of decimal digits for Prices {2}.
// [*] (DECIMAL) Maximum number of decimal for contracts {3}.
// [/LIST]
// [B]__ SETTINGS - Zignaly[/B]
// [LIST]
// [*] (ZIG) Integration type {TradingView only}: [b]Hybrid[/b]: Both TradingView and Zignaly handle take profit, trailing stops and stop losses. Useful if you are scared about TradingView not firing an alert. It might arise problems if TradingView and Zignaly get out of sync. [b]TradingView only[/b]: TradingView sends entry and exit orders to Zignaly so that Zignaly only buys or sells. Zignaly won't handle stop loss or other settings on its own.
// [*] (ZIG) Zignaly Alert Type {WebHook}: 'Email' or 'WebHook'.
// [*] (ZIG) Provider type {Copy Trader Provider}: 'Copy Trader Provider' or 'Signal Provider'. 'Copy Trader Provider' sends a percentage to manage. 'Signal Provider' sends a quote to manage.
// [*] (ZIG) Exchange: 'Binance' or 'Kucoin'.
// [*] (ZIG) Exchange Type {Spot}: 'Spot' or 'Futures'.
// [*] (ZIG) Leverage {1}. Set it to '1' when '(ZIG) Exchange Type' is set to 'Spot'.
// [/LIST]
// [B]__ SETTINGS - Strategy[/B]
// [LIST]
// [*] (STRAT) Strategy Type: 'Long and Short', 'Long Only' or 'Short Only'.
// [*] (STOPTAKE) Take Profit? {True}: Whether to enable Take Profit.
// [*] (STOPTAKE) Stop Loss? {True}: Whether to enable Stop Loss.
// [*] (TRAILING) Enable Trailing Take Profit (%) {True}: Whether to enable Trailing Take Profit.
// [*] (STOPTAKE) Take Profit % {3.0}: Take profit percentage. This setting is only used when '(STOPTAKE) Take Profit?' setting is set to true.
// [*] (STOPTAKE) Stop Loss % {2.0}: Stop loss percentage. This setting is only used when '(STOPTAKE) Stop Loss?' setting is set to true.
// [*] (TRAILING) Trailing Take Profit Trigger (%) {2.5}: Trailing Stop Trigger Percentage. This setting is only used when '(TRAILING) Enable Trailing Take Profit (%)' setting is set to true.
// [*] (TRAILING) Trailing Take Profit as a percentage of Trailing Take Profit Trigger (%) {25.0}: Trailing Stop Distance Percentage. This setting is only used when '(TRAILING) Enable Trailing Take Profit (%)' setting is set to true.
// [*] (RECENT) Number of minutes to wait to open a new order after the previous one has been opened {6}.
// [/LIST]

// [B]DEFAULT SETTINGS[/B]

// By default this strategy has been setup with these beginner settings:
// [LIST]
// [*] '(ZIG) Integration type' : TradingView only
// [*] '(ZIG) Provider type'    : 'Copy Trader Provider'
// [*] '(ZIG) Exchange'         : 'Binance'
// [*] '(ZIG) Exchange Type'    : 'Spot'
// [*] '(STRAT) Strategy Type'  : 'Long Only'
// [*] '(ZIG) Leverage'         : '1' (Or no leverage)
// [/LIST]
// but you can change those settings if needed.


// [B]FIRST STEP[/B]
// [LIST]
// [*] For both future or spot markets you should make sure to change '(ZIG) Zignaly Alert Type' to match either WebHook or Email. If you have a non paid account in TradingView as in October 2020 you would have to use Email which it's free to use.
// [/LIST]

// [B]RECOMMENDED SETTINGS[/B]
// [B]__ RECOMMENDED SETTINGS - Spot markets[/B]
// [LIST]
// [*] '(ZIG) Exchange Type'   setting should be set to 'Spot'
// [*] '(STRAT) Strategy Type' setting should be set to 'Long Only'
// [*] '(ZIG) Leverage'        setting should be set to '1'
// [/LIST]
// [B]__ RECOMMENDED SETTINGS - Future markets[/B]
// [LIST]
// [*] '(ZIG) Exchange Type'   setting should be set to 'Futures'
// [*] '(STRAT) Strategy Type' setting should be set to 'Long and Short'
// [*] '(ZIG) Leverage'        setting might be changed if desired.
// [/LIST]
// [B]__ RECOMMENDED SETTINGS - Signal Providers[/B]
// [LIST]
// [*] '(ZIG) Provider type'   setting should be set to 'Signal Provider'
// [*] '(CAPITAL) Capital quote invested per order in USDT units' setting might be changed if desired.
// [/LIST]
// [B]__ RECOMMENDED SETTINGS - Copy Trader Providers[/B]
// [LIST]
// [*] '(ZIG) Provider type'   setting should be set to 'Copy Trader Provider'
// [*] '(CAPITAL) Capital percentage invested per order (%)' setting might be changed if desired.
// [*] Strategy Properties setting: 'Initial Capital' might be changed if desired.
// [/LIST]

// [B]INTEGRATION TYPE EXPLANATION[/B]
// [LIST]
// [*] 'Hybrid': Both TradingView and Zignaly handle take profit, trailing stops and stop losses. Useful if you are scared about TradingView not firing an alert. It might arise problems if TradingView and Zignaly get out of sync.
// [*] 'TradingView only': TradingView sends entry and exit orders to Zignaly so that Zignaly only buys or sells. Zignaly won't handle stop loss or other settings on its own.
// [/LIST]

// [B]HOW TO USE THIS STRATEGY[/B]
// [LIST]
// [*] Beginner: Copy and paste the strategy and change it to your needs. Turn off '(DEBUG) Enable debug on order comments' setting.
// [*] Medium: Reuse functions and inputs from this strategy into your own as if it was a library.
// [*] Advanced: Check Strategy Tester. List of trades. Copy and paste the different suggested 'alert_message' variable contents to your script and change them to your needs.
// [*] Expert: You needed a way to pass data from TradingView script to the alert. Now you know it's the 'alert_message' variable. You can find several examples in the source code using the variable. You also have seen 'ALERTS SETUP' explanation below. An additional quick look at 'Strategy Tester', 'List of Trades' and you are ready to go.
// [/LIST]


// [B] ALERTS SETUP[/B]
// This is the important piece of information that allows you to connect TradingView to Zignaly in a semi-automatic manner.
// [B] __ ALERTS SETUP - WebHook[/B]
// [LIST]
// [*] Webhook URL: https : // zignaly . com / api / signals.php?key=MYSECRETKEY
// [*] Message: { {{strategy.order.alert_message}} , "key" : "MYSECRETKEY" }
// [/LIST]
// [B] __ ALERTS SETUP - Email[/B]
// [LIST]
// [*] Setup a new Hotmail account
// [*] Add it as an 'SMS email' in TradingView Profile settings page.
// [*] Confirm your own the email address
// [*] Create a rule in your Hotmail account that 'Redirects' (not forwards) emails to 'signals @ zignaly . email' when (1): 'Subject' includes 'Alert', (2): 'Email body' contains string 'MYZIGNALYREDIRECTTRIGGER' and (3): 'From' contains 'noreply @ tradingview . com'.
// [*] In 'More Actions' check: Send Email-to-SMS
// [*] Message: ||{{strategy.order.alert_message}}||key=MYSECRETKEY||
// MYZIGNALYREDIRECTTRIGGER
// [/LIST]


// '(DEBUG) Enable debug on order comments' is turned on by default so that you can see in the Strategy Tester. List of Trades. The different orders alert_message that would have been sent to your alert. You might want to turn it off it some many letters in the screen is problem.

// [B]STRATEGY ADVICE[/B]
// [LIST]
// [*] If you turn on 'Take Profit' then turn off 'Trailing Take Profit'.
// [/LIST]
//
// [B]ZIGNALY SIDE ADVICE[/B]
// [LIST]
// [*] If you are a 'Signal Provider' make sure that 'Allow reusing the same signalId if there isn't any open position using it?' setting in the profile tab is set to true.
// [*] You can find your 'MYSECRETKEY' in your 'Copy Trader/Signal' provider Edit tab at 'Signal URL'.
// [/LIST]
//
// [B]ADDITIONAL ZIGNALY DOCUMENTATION[/B]
// This beginner's guide is quite basic and meant to be an introduction. Please read additional documentation to learn what you actually can do with Zignaly.
// [LIST]
// [*] docs . zignaly . com / signals / how-to -- How to send signals to Zignaly
// [*] help . zignaly . com / hc/en-us/categories/360002703720-Sending-Signals -- Sending zignals
// [/LIST]
//
// [B]FINAL REMARKS[/B]
// [LIST]
// [*] This strategy tries to match the Pine Script Coding Conventions as best as possible.
// [*] You can check my 'Ruckard TradingLatino' strategy for a more complex strategy that it's also integrated with Zignaly. Unfortunatley it does not use Pine Script Coding Conventions as much.
// [/LIST]

// Tradingview Public description - END

strategy("Ruckard Scalping 03 001", shorttitle="A001R3Scalping", overlay=true, max_bars_back=5000, calc_on_order_fills=false, calc_on_every_tick=false, pyramiding=3, initial_capital=1000, slippage=1, commission_type=strategy.commission.percent, commission_value=0.1)

// INPUTS - BEGIN

// Strategy - Inputs
i_enableZignalyAlert = input(true, "(ZIG) Enable Alert message {True}")

_ZIGHYBRIDINTEGRATION_     = "Hybrid"                , _ZIGTVONLYINTEGRATION_  = "TradingView only"
i_zignalyIntegrationType    = input(_ZIGTVONLYINTEGRATION_,  "(ZIG) Integration type", options=[_ZIGTVONLYINTEGRATION_, _ZIGHYBRIDINTEGRATION_])
_ZIGSIGNALPROVIDER_     = "Signal Provider"                , _ZIGCOPYTRADERPROVIDER_  = "Copy Trader Provider"
i_zignalyProviderType    = input(_ZIGCOPYTRADERPROVIDER_,  "(ZIG) Provider type", options=[_ZIGSIGNALPROVIDER_, _ZIGCOPYTRADERPROVIDER_])
L_S     = "Long and Short"                , _L_  = "Long Only"                , _S_ = "Short Only"
i_strategyType    = input(_L_,  "(STRAT) Strategy Type", options=[L_S, _L_, _S_])
i_startTime = input(title="Start Time", type=input.time, defval=timestamp("05 Jul 2021 00:00 +0300"))
// Order comments based debug
i_enableOrderCommentDebug = input(true, title="(DEBUG) Enable debug on order comments {True}", type=input.bool)
i_enableTakeProfit      = input(true, "(STOPTAKE) Take Profit? {True}")
i_enableStopLoss      = input(true, "(STOPTAKE) Stop Loss? {True}")
i_enableTrailingTakeProfit = input(true, title="(TRAILING) Enable Trailing Take Profit (%) {True}", type=input.bool)
i_TakeProfit      = input(1.0, title="(STOPTAKE) Take Profit % {1.0}") / 100
i_TakeProfitPercentage      = input(50.0, title="(STOPTAKE) Take Profit Amount Percentage % {50.0}") / 100
i_StopLoss      = input(10.0, title="(STOPTAKE) Stop Loss % {10.0}", minval=0.01  ) / 100
// Trailing Take Profit - Inputs
i_trailingTakeProfitPercentageTrigger = input(1.2, "(TRAILING) Trailing Take Profit Trigger (%) {2.5}",minval=0,step=0.01,type=input.float) * 0.01
i_trailingTakeProfitPercentageOffset = input(25.0, "(TRAILING) Trailing Take Profit as a percentage of Trailing Take Profit Trigger (%) {25.0}",minval=0,step=0.01,type=input.float) * 0.01

// DCA - Inputs
i_DCAAmountPercentage1 = input(100, "(DCA1) Amount Percentage (%) {100.0}",minval=1,step=0.01,type=input.float) * 0.01
i_DCAAmountPercentage2 = input(50, "(DCA1) Amount Percentage (%) {50.0}",minval=1,step=0.01,type=input.float) * 0.01


// Zignaly - Email (zignalye)
_ZIGNALYE_="Email", _ZIGNALYW_="WebHook"
i_zignalyAlertType    = input(_ZIGNALYW_,  "(ZIG) Zignaly Alert Type {WebHook}", options=[_ZIGNALYW_, _ZIGNALYE_])
_ZIGEXBINANCE_     = "Binance"                , _ZIGEXKUCOIN_  = "Kucoin"
i_zignalyExchange   = input(_ZIGEXBINANCE_,  "(ZIG) Exchange", options=[_ZIGEXBINANCE_, _ZIGEXKUCOIN_])
_ZIGEXTYPESPOT_     = "spot"                , _ZIGEXFUTURES_  = "futures"
i_zignalyExchangeType   = input(_ZIGEXTYPESPOT_,  "(ZIG) Exchange Type {Spot}", options=[_ZIGEXTYPESPOT_, _ZIGEXFUTURES_])
i_zignalyLeverage = input(1, "(ZIG) Leverage {1}",minval=1,step=1,maxval=125,type=input.integer)
var i_zignalyLeverage_str = tostring(i_zignalyLeverage) // It needs to run only once
i_priceDecimalDigits = input(2, "Number of decimal digits for Prices {2}", minval=0, maxval=10, step=1)
// Decimal - Inputs
i_contractMaximumDecimalNumber = input(3, title="(DECIMAL) Maximum number of decimal for contracts {3}",minval=0)
i_tooRecentMinutesNumber = input(6, "(RECENT) Number of minutes to wait to open a new order after the previous one has been opened {6}", minval=1, maxval=100, step=1)
i_CapitalQuote      = input(100.0,  title="(CAPITAL) Capital quote invested per order in USDT units {100.0}")
i_CapitalPercentage = input(25.0,   title="(CAPITAL) Capital percentage invested per order (%) {25.0}",minval=0,step=0.01,type=input.float) * 0.01

// INPUTS - END



// Strategy - INIT - BEGIN

// Dynamic Trailing Take Profit - Variables

var int buyOrderOpenBarIndex = na
var int sellOrderOpenBarIndex = na

var float buyStopLoss = na
var float sellStopLoss = na
var float newBuyStopLoss = na
var float newSellStopLoss = na

// Handle to avoid two long and short orders being too next to each other
var bool _oldInsideABuyOrder = false
var bool oldInsideASellOrder = false
var bool insideABuyOrder = false
var bool insideASellOrder = false

_oldInsideABuyOrder := insideABuyOrder
oldInsideASellOrder := insideASellOrder

var int lastOrderOpenBarTime = na

afterStartTime = time >= i_startTime

// Handle recalculate after Stop Loss / Take Profit order
if (strategy.position_size == 0.0)
    insideABuyOrder := false
    insideASellOrder := false
else
    lastOrderOpenBarTime := time_close

// Zignaly
exchangeTickerID = syminfo.basecurrency + syminfo.currency
var string zignalySeparator = ","
var string zignalyQuote = "\""
var string zignalyEquals = "="
if ( i_zignalyAlertType == _ZIGNALYE_)
    zignalySeparator := "||"
    zignalyQuote := ""
    zignalyEquals := "="
else
    zignalySeparator := ","
    zignalyQuote := "\""
    zignalyEquals := ":"

zignalyCommonAlertMessage = zignalyQuote + "exchange" + zignalyQuote + zignalyEquals + zignalyQuote + i_zignalyExchange + zignalyQuote + zignalySeparator + zignalyQuote + "exchangeAccountType" + zignalyQuote + zignalyEquals + zignalyQuote + i_zignalyExchangeType + zignalyQuote + zignalySeparator + zignalyQuote + "pair" + zignalyQuote + zignalyEquals + zignalyQuote + "" + exchangeTickerID  + zignalyQuote + zignalySeparator + zignalyQuote + "leverage" + zignalyQuote + zignalyEquals + zignalyQuote + i_zignalyLeverage_str + zignalyQuote

var string tmpOrderComment = na
var string tmpOrderAlertMessage = na

var int i_tooRecentMinutesNumber_ms = i_tooRecentMinutesNumber * 60 * 1000 // Convert minutes into milliseconds only once

// Strategy - INIT - END

// FUNCTIONS - BEGIN

// Decimals - Functions
f_getContractMultiplier(_contractMaximumDecimalNumber) =>
    _contractMultiplier = 1
    if (_contractMaximumDecimalNumber == 0)
        _contractMultiplier // Return 1
    else
        for _counter = 1 to _contractMaximumDecimalNumber
            _contractMultiplier:= _contractMultiplier * 10
        _contractMultiplier

f_priceDecimalDigitsZeroString () =>
    // Dependencies: i_priceDecimalDigits (initialized in inputs).
    _zeroString = ""
    if not (i_priceDecimalDigits == 0)
        for _digit = 1 to i_priceDecimalDigits
            _zeroString := _zeroString + "0"
    _zeroString

// Zignalye - Functions - BEGIN
f_getZignalyLongAlertMessage(_entryQuantityContractsUSDT, _currentCapital) =>
    // Dependencies: zignalyQuote
    // Dependencies: zignalyEquals
    // Dependencies: zignalySeparator
    // Dependencies: zignalyCommonAlertMessage

    // Dependencies: i_enableStopLoss (initialized in inputs).
    // Dependencies: i_enableTakeProfit (initialized in inputs).
    // Dependencies: i_TakeProfit (initialized in inputs).
    // Dependencies: i_enableTrailingTakeProfit (initialized in inputs).
    // Dependencies: i_trailingTakeProfitPercentageOffset (initialized in inputs).
    // Dependencies: i_trailingTakeProfitPercentageTrigger (initialized in inputs).
    // Dependencies: i_zignalyIntegrationType (initialized in inputs).
    
    // Function Dependencies: f_priceDecimalDigitsZeroString()

    var string _zignaleStopLossCombo = ""
    var string _zignaleTakeProfitCombo = ""
    var string _zignaleTrailingTakeProfitCombo = ""
    _zignalyLongCommonAlertMessage = zignalyQuote + "type" + zignalyQuote + zignalyEquals + zignalyQuote + "entry" + zignalyQuote + zignalySeparator + zignalyQuote + "side" + zignalyQuote + zignalyEquals + zignalyQuote + "long" + zignalyQuote + zignalySeparator + zignalyQuote + "orderType" + zignalyQuote + zignalyEquals + zignalyQuote + "market" + zignalyQuote + zignalySeparator + zignalyQuote + "signalId" + zignalyQuote + zignalyEquals + zignalyQuote + "LONG-" + exchangeTickerID + zignalyQuote
    float _floatEntryQuantityContractsUSDT = _entryQuantityContractsUSDT
    _entryQuantityContractsUSDTStr = tostring(_entryQuantityContractsUSDT, "0." + f_priceDecimalDigitsZeroString())
    float _floatCurrentCapital = _currentCapital
    float _entryQuantityContractsPercent = (_floatEntryQuantityContractsUSDT / _floatCurrentCapital) * i_TakeProfitPercentage * 100.00
    _entryQuantityContractsPercentStr = tostring(_entryQuantityContractsPercent, "0." + f_priceDecimalDigitsZeroString())

    // This is actually not needed because with pyramiding=0 it's impossible that an order is scaled (and thus modified)
    float _constantBuyStopLoss = na
    if (_oldInsideABuyOrder and insideABuyOrder)
        _constantBuyStopLoss := buyStopLoss
    else
        _constantBuyStopLoss := newBuyStopLoss

    if (i_enableStopLoss and (i_zignalyIntegrationType == _ZIGHYBRIDINTEGRATION_))
        _zignaleStopLossCombo := zignalySeparator + zignalyQuote + "stopLossPercentage" + zignalyQuote + zignalyEquals + zignalyQuote + "-" + tostring((nz(_constantBuyStopLoss) * 100), "0." + f_priceDecimalDigitsZeroString()) + zignalyQuote
    else
        _zignaleStopLossCombo := ""
    if (i_enableTakeProfit and (i_zignalyIntegrationType == _ZIGHYBRIDINTEGRATION_))
        _zignaleTakeProfitCombo := zignalySeparator + zignalyQuote + "takeProfitPercentage1" + zignalyQuote + zignalyEquals + zignalyQuote + "" + tostring((i_TakeProfit * 100), "0." + f_priceDecimalDigitsZeroString()) + zignalyQuote
    else
        _zignaleTakeProfitCombo := ""
    if (i_enableTrailingTakeProfit and (i_zignalyIntegrationType == _ZIGHYBRIDINTEGRATION_))
        _zignaleTrailingTakeProfitCombo := zignalySeparator + zignalyQuote + "trailingStopDistancePercentage" + zignalyQuote + zignalyEquals + zignalyQuote + "-" + tostring((i_trailingTakeProfitPercentageOffset * 100), "0." + f_priceDecimalDigitsZeroString()) + zignalyQuote + zignalySeparator + zignalyQuote + "trailingStopTriggerPercentage" + zignalyQuote + zignalyEquals + zignalyQuote + "" + tostring((i_trailingTakeProfitPercentageTrigger * 100), "0." + f_priceDecimalDigitsZeroString()) + zignalyQuote
    else
        _zignaleTrailingTakeProfitCombo := ""



    var string _message = ""
    if (i_zignalyProviderType == _ZIGCOPYTRADERPROVIDER_)
        _message := 
             zignalyCommonAlertMessage + 
             zignalySeparator + 
             _zignalyLongCommonAlertMessage + 
             zignalySeparator + 
             zignalyQuote + "positionSizePercentage" + zignalyQuote + zignalyEquals + zignalyQuote + "" +  _entryQuantityContractsPercentStr + zignalyQuote +
             _zignaleStopLossCombo +
             _zignaleTakeProfitCombo +
             _zignaleTrailingTakeProfitCombo
    else // _ZIGSIGNALPROVIDER_
        _message := 
             zignalyCommonAlertMessage + 
             zignalySeparator + 
             _zignalyLongCommonAlertMessage + 
             zignalySeparator + 
             zignalyQuote + "positionSizeQuote" + zignalyQuote + zignalyEquals + zignalyQuote + "" +  _entryQuantityContractsUSDTStr + zignalyQuote +
             _zignaleStopLossCombo +
             _zignaleTakeProfitCombo +
             _zignaleTrailingTakeProfitCombo

    _message

f_getZignalyLongCloseAlertMessage() =>
    // Dependencies: zignalyQuote
    // Dependencies: zignalyEquals
    // Dependencies: zignalySeparator
    // Dependencies: zignalyCommonAlertMessage

    _zignalyLongCloseCommonAlertMessage = zignalyQuote + "type" + zignalyQuote + zignalyEquals + zignalyQuote + "exit" + zignalyQuote + zignalySeparator + zignalyQuote + "side" + zignalyQuote + zignalyEquals + zignalyQuote + "long" + zignalyQuote + zignalySeparator + zignalyQuote + "orderType" + zignalyQuote + zignalyEquals + zignalyQuote + "market" + zignalyQuote + zignalySeparator + zignalyQuote + "signalId" + zignalyQuote + zignalyEquals + zignalyQuote + "LONG-" + exchangeTickerID + zignalyQuote
    
    var string _message = ""
    _message := zignalyCommonAlertMessage + zignalySeparator + _zignalyLongCloseCommonAlertMessage
    _message

f_getZignalyShortAlertMessage(_entryQuantityContractsUSDT, _currentCapital) =>
    // Dependencies: zignalyQuote
    // Dependencies: zignalyEquals
    // Dependencies: zignalySeparator
    // Dependencies: zignalyCommonAlertMessage

    // Dependencies: i_enableStopLoss (initialized in inputs).
    // Dependencies: i_enableTakeProfit (initialized in inputs).
    // Dependencies: i_TakeProfit (initialized in inputs).
    // Dependencies: i_enableTrailingTakeProfit (initialized in inputs).
    // Dependencies: i_trailingTakeProfitPercentageOffset (initialized in inputs).
    // Dependencies: i_trailingTakeProfitPercentageTrigger (initialized in inputs).
    // Dependencies: i_zignalyIntegrationType (initialized in inputs).
    
    // Function Dependencies: f_priceDecimalDigitsZeroString()

    var string _zignaleStopLossCombo = ""
    var string _zignaleTakeProfitCombo = ""
    var string _zignaleTrailingTakeProfitCombo = ""
    _zignalyLongCloseCommonAlertMessage = zignalyQuote + "type" + zignalyQuote + zignalyEquals + zignalyQuote + "entry" + zignalyQuote + zignalySeparator + zignalyQuote + "side" + zignalyQuote + zignalyEquals + zignalyQuote + "short" + zignalyQuote + zignalySeparator + zignalyQuote + "orderType" + zignalyQuote + zignalyEquals + zignalyQuote + "market" + zignalyQuote + zignalySeparator + zignalyQuote + "signalId" + zignalyQuote + zignalyEquals + zignalyQuote + "SHORT-" + exchangeTickerID + zignalyQuote
    float _floatEntryQuantityContractsUSDT = _entryQuantityContractsUSDT
    _entryQuantityContractsUSDTStr = tostring(_entryQuantityContractsUSDT, "0." + f_priceDecimalDigitsZeroString())
    float _floatCurrentCapital = _currentCapital
    float _entryQuantityContractsPercent = (_floatEntryQuantityContractsUSDT / _floatCurrentCapital) * i_TakeProfitPercentage * 100.00
    _entryQuantityContractsPercentStr = tostring(_entryQuantityContractsPercent, "0." + f_priceDecimalDigitsZeroString())

    // This is actually not needed because with pyramiding=0 it's impossible that an order is scaled (and thus modified)
    float _constantSellStopLoss = na
    if (oldInsideASellOrder and insideASellOrder)
        _constantSellStopLoss := sellStopLoss
    else
        _constantSellStopLoss := newSellStopLoss
    
    if (i_enableStopLoss and (i_zignalyIntegrationType == _ZIGHYBRIDINTEGRATION_))
        _zignaleStopLossCombo := zignalySeparator + zignalyQuote + "stopLossPercentage" + zignalyQuote + zignalyEquals + zignalyQuote + "" + tostring((nz(_constantSellStopLoss) * 100), "0." + f_priceDecimalDigitsZeroString()) + zignalyQuote
    else
        _zignaleStopLossCombo := ""
    if (i_enableTakeProfit and (i_zignalyIntegrationType == _ZIGHYBRIDINTEGRATION_))
        _zignaleTakeProfitCombo := zignalySeparator + zignalyQuote + "takeProfitPercentage1" + zignalyQuote + zignalyEquals + zignalyQuote + "-" + tostring((i_TakeProfit * 100), "0." + f_priceDecimalDigitsZeroString()) + zignalyQuote
    else
        _zignaleTakeProfitCombo := ""
    if (i_enableTrailingTakeProfit and (i_zignalyIntegrationType == _ZIGHYBRIDINTEGRATION_))
        _zignaleTrailingTakeProfitCombo := zignalySeparator + zignalyQuote + "trailingStopDistancePercentage" + zignalyQuote + zignalyEquals + zignalyQuote + "" + tostring((i_trailingTakeProfitPercentageOffset * 100), "0." + f_priceDecimalDigitsZeroString()) + zignalyQuote + zignalySeparator + zignalyQuote + "trailingStopTriggerPercentage" + zignalyQuote + zignalyEquals + zignalyQuote + "-" + tostring((i_trailingTakeProfitPercentageTrigger * 100), "0." + f_priceDecimalDigitsZeroString()) + zignalyQuote
    else
        _zignaleTrailingTakeProfitCombo := ""



    var string _message = ""
    if (i_zignalyProviderType == _ZIGCOPYTRADERPROVIDER_)
        _message := 
             zignalyCommonAlertMessage + 
             zignalySeparator + 
             _zignalyLongCloseCommonAlertMessage + 
             zignalySeparator + 
             zignalyQuote + "positionSizePercentage" + zignalyQuote + zignalyEquals + zignalyQuote + "" +  _entryQuantityContractsPercentStr + zignalyQuote +
             _zignaleStopLossCombo +
             _zignaleTakeProfitCombo +
             _zignaleTrailingTakeProfitCombo
    else // _ZIGSIGNALPROVIDER_
        _message := 
             zignalyCommonAlertMessage + 
             zignalySeparator + 
             _zignalyLongCloseCommonAlertMessage + 
             zignalySeparator + 
             zignalyQuote + "positionSizeQuote" + zignalyQuote + zignalyEquals + zignalyQuote + "" +  _entryQuantityContractsUSDTStr + zignalyQuote +
             _zignaleStopLossCombo +
             _zignaleTakeProfitCombo +
             _zignaleTrailingTakeProfitCombo

    _message

f_getZignalyShortCloseAlertMessage() =>
    // Dependencies: zignalyQuote
    // Dependencies: zignalyEquals
    // Dependencies: zignalySeparator
    // Dependencies: zignalyCommonAlertMessage

    zignalyShortCloseCommonAlertMessage = zignalyQuote + "type" + zignalyQuote + zignalyEquals + zignalyQuote + "exit" + zignalyQuote + zignalySeparator + zignalyQuote + "side" + zignalyQuote + zignalyEquals + zignalyQuote + "short" + zignalyQuote + zignalySeparator + zignalyQuote + "orderType" + zignalyQuote + zignalyEquals + zignalyQuote + "market" + zignalyQuote + zignalySeparator + zignalyQuote + "signalId" + zignalyQuote + zignalyEquals + zignalyQuote + "SHORT-" + exchangeTickerID + zignalyQuote
    
    var string _message = ""
    _message := zignalyCommonAlertMessage + zignalySeparator + zignalyShortCloseCommonAlertMessage
    _message

// Zignalye - Functions - END

// Order comment - Functions - BEGIN

f_getOrderComment(_typeOrder, _side, _alertMessage) =>
    // Dependencies: i_enableOrderCommentDebug (initialized in inputs).

    // TODO: Add descriptive comments
    // _typeOrder="entry" or _typeOrder="close"
    // _side: true means long ; false means short ; We can use strategy.long or strategy.short as true and false aliases
    // _alertMessage
    var string _orderComment = ""
    
    if (i_enableOrderCommentDebug)
        _orderComment := _alertMessage
    else
        // TODO: Use human explanations instead of default order comment value (na)
        _orderComment := na
        
    _orderComment

// Order comment - Functions - END

// Too recent orders functions

f_getTooRecentOrderNotOpenAdvice () =>
    // Dependencies: i_tooRecentMinutesNumber_ms
    // Dependencies: lastOrderOpenBarTime

    // Condition 1: The order was open
    // Condition 2: The order was long or short
    // Condition 3: Time since order was last open is smaller than minimum between orders
    // Returns boolean
    bool _isTooRecent =  ((time_close) <= (lastOrderOpenBarTime + i_tooRecentMinutesNumber_ms))

    bool _tooRecentOrderBuyNotOpenAdvice = na
    if (na(lastOrderOpenBarTime))
        _tooRecentOrderBuyNotOpenAdvice := false
    else
        _tooRecentOrderBuyNotOpenAdvice := _isTooRecent
    _tooRecentOrderBuyNotOpenAdvice

// FUNCTIONS - END


// Strategy Body - BEGIN


// Simple Logic to go LONG/LONG or go SHORT/SHORT - BEGIN
// longCondition = crossover(sma(close, 14), sma(close, 28))
// shortCondition = crossunder(sma(close, 14), sma(close, 28))
longCondition = sma(close, 14) >= sma(close, 28)
shortCondition = sma(close, 14) < sma(close, 28)
// Simple Logic to go LONG/LONG or go SHORT/SHORT - END


// Position price calculation - BEGIN
float positionPrice = na
if (insideASellOrder or insideABuyOrder)
    positionPrice := strategy.position_avg_price
else
    positionPrice := close
    
// Position price calculation - END

tooRecentOrderNotOpenAdvice = f_getTooRecentOrderNotOpenAdvice ()

newBuyStopLoss := i_StopLoss
newSellStopLoss := i_StopLoss

// Decide if we are going to LONG/Go LONG - BEGIN
PRE_LONG = false
PRE_LONG := longCondition and (not tooRecentOrderNotOpenAdvice)

// LONG = PRE_LONG[1] and PRE_LONG // Wait for confirmation
LONG = PRE_LONG and afterStartTime // Do not wait for confirmation

// Decide if we are going to LONG/Go LONG - END

// Decide if we are going to SHORT/Go SHORT - BEGIN
PRE_SHORT = false
PRE_SHORT := shortCondition and (not tooRecentOrderNotOpenAdvice)

// SHORT = PRE_SHORT[1] and PRE_SHORT // Wait for confirmation
SHORT = PRE_SHORT and afterStartTime // Do not wait for confirmation

// Decide if we are going to SHORT/Go SHORT - END

// Decide if a LONG/LONG entry should be closed - BEGIN
LONG_CLOSE = true
LONG_CLOSE := not (longCondition)

// Let's make sure LONG does not trigger if LONG_CLOSE would tell us to close the LONG
if LONG_CLOSE
    LONG := false
// Decide if a LONG/LONG entry should be closed - END

// Decide if a SHORT/SHORT entry should be closed - BEGIN
SHORT_CLOSE = true
SHORT_CLOSE := not (shortCondition)

// Let's make sure SHORT does not trigger if SHORT_CLOSE would tell us to close the SHORT
if SHORT_CLOSE
    SHORT := false
// Decide if a SHORT/SHORT entry should be closed - END

// How much to LONG/GO LONG/SHORT/GO SHORT - BEGIN

// Custom take profit and stop loss
LongTakeProfit = positionPrice * (1 + i_TakeProfit)
ShortTakeProfit = positionPrice * (1 - i_TakeProfit)

float LongStopLoss = na
float ShortStopLoss = na

LongStopLoss := positionPrice * (1 - buyStopLoss)
ShortStopLoss := positionPrice * (1 + sellStopLoss)

float entryQuantity = na
float currentCapital = strategy.initial_capital + strategy.netprofit

if (i_zignalyProviderType == _ZIGCOPYTRADERPROVIDER_)
    entryQuantity := i_CapitalPercentage * currentCapital
else // _ZIGSIGNALPROVIDER_
    entryQuantity := i_CapitalQuote

float entryQuantityContractsReducer = 0.99

contractMultiplier = f_getContractMultiplier(i_contractMaximumDecimalNumber)

// We assume the current price is current bar close

entryQuantityContracts = (floor(((entryQuantity / close) * entryQuantityContractsReducer) * contractMultiplier) / contractMultiplier)
entryQuantityContractsUSDT = entryQuantityContracts * (close)
// Case 0: No DCA
//   No need to modify entryQuantityContractsUSDT
// Case 1: First DCA
if (LONG_DCA and not(LONG_DCA[1]))
    entryQuantityContractsUSDT := i_DCAAmountPercentage1 * entryQuantityContractsUSDT
// Case 2: Second DCA
if (LONG_DCA and (LONG_DCA[1]))
    entryQuantityContractsUSDT := i_DCAAmountPercentage2 * entryQuantityContractsUSDT
// Case 3: Third DCA
// Should not trigger because of pyramiding=3.

// How much to LONG/GO LONG/SHORT/GO SHORT - END


// GO LONG only logic - BEGIN

var float tmpPositionBeforeOpeningOrder = na

if (i_strategyType == _L_)
    if LONG
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        tmpOrderAlertMessage := f_getZignalyLongAlertMessage(entryQuantityContractsUSDT, currentCapital, LONG_DCA)
        tmpOrderComment := f_getOrderComment("entry", strategy.long, tmpOrderAlertMessage)
        strategy.entry("[B]", strategy.long, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            buyOrderOpenBarIndex := bar_index + 1
        if (not insideABuyOrder)
            buyStopLoss := newBuyStopLoss
        insideABuyOrder := true
        0 // Workaround for making every if branch to return the same type of value
    else if LONG_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.long, f_getZignalyLongCloseAlertMessage())
        strategy.close("[B]", alert_message=i_enableZignalyAlert ? f_getZignalyLongCloseAlertMessage() : na, comment=tmpOrderComment)
        insideABuyOrder := false
        0 // Workaround for making every if branch to return the same type of value

// GO LONG only logic - END

// GO SHORT only logic - BEGIN
if (i_strategyType == _S_)
    if SHORT
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        tmpOrderAlertMessage := f_getZignalyShortAlertMessage(entryQuantityContractsUSDT, currentCapital, SHORT_DCA)
        tmpOrderComment := f_getOrderComment("entry", strategy.short, tmpOrderAlertMessage)
        strategy.entry("[S]", strategy.short, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            sellOrderOpenBarIndex := bar_index + 1
        if (not insideASellOrder)
            sellStopLoss := newSellStopLoss
        insideASellOrder := true
        0 // Workaround for making every if branch to return the same type of value
    else if SHORT_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.short, f_getZignalyShortCloseAlertMessage())
        strategy.close("[S]", alert_message=i_enableZignalyAlert ? f_getZignalyShortCloseAlertMessage() : na, comment=tmpOrderComment)
        insideASellOrder := false
        0 // Workaround for making every if branch to return the same type of value
// GO SHORT only logic - END

// GO LONG and SHORT logic - BEGIN
if (i_strategyType == L_S)
// Asumption: Above we have:
// if LONG_CLOSE
//    LONG := false
// if SHORT_CLOSE
//    SHORT := false

    // LONG and SHORT cannot be true at the same time
    // Anyways we will take it into account
    if (LONG == true) and (SHORT == true)
        LONG := true
        SHORT := false
        SHORT_CLOSE := true

    if LONG
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        tmpOrderAlertMessage := f_getZignalyLongAlertMessage(entryQuantityContractsUSDT, currentCapital, LONG_DCA)
        tmpOrderComment := f_getOrderComment("entry", strategy.long, tmpOrderAlertMessage)
        strategy.entry("[B]", strategy.long, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            buyOrderOpenBarIndex := bar_index + 1
        if (not insideABuyOrder)
            buyStopLoss := newBuyStopLoss
        insideABuyOrder := true
    if LONG_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.long, f_getZignalyLongCloseAlertMessage())
        strategy.close("[B]", alert_message=i_enableZignalyAlert ? f_getZignalyLongCloseAlertMessage() : na, comment=tmpOrderComment)
        insideABuyOrder := false
    if SHORT
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        tmpOrderAlertMessage := f_getZignalyShortAlertMessage(entryQuantityContractsUSDT, currentCapital, SHORT_DCA)
        tmpOrderComment := f_getOrderComment("entry", strategy.short, tmpOrderAlertMessage)
        strategy.entry("[S]", strategy.short, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            sellOrderOpenBarIndex := bar_index + 1
        if (not insideASellOrder)
            sellStopLoss := newSellStopLoss
        insideASellOrder := true
    if SHORT_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.short, f_getZignalyShortCloseAlertMessage())
        strategy.close("[S]", alert_message=i_enableZignalyAlert ? f_getZignalyShortCloseAlertMessage() : na, comment=tmpOrderComment)
        insideASellOrder := false
// GO LONG and SHORT logic - END

// Handle STOP LOSS (and similar) order exits - BEGIN

// Quick Paste - BEGIN
float longTrailingTakeProfitPrice = na
float longTrailingTakeProfitPoints = na
float longTrailingTakeProfitOffset = na
float shortTrailingTakeProfitPrice = na
float shortTrailingTakeProfitPoints = na
float shortTrailingTakeProfitOffset = na

// Calculate trailing_take_profit_offset based on tick units
longTmpTtpBaseValue = positionPrice * (1 + i_trailingTakeProfitPercentageTrigger)
longTmpTtpTop_value = longTmpTtpBaseValue * (1 + i_trailingTakeProfitPercentageOffset)
longTrailingTakeProfitOffsetFloat = longTmpTtpTop_value - longTmpTtpBaseValue
float longTrailingTakeProfitOffsetTick = floor (longTrailingTakeProfitOffsetFloat / syminfo.mintick)

shortTmpTtpBaseValue = positionPrice * (1 - i_trailingTakeProfitPercentageTrigger)
shortTmpTtpBottomValue = shortTmpTtpBaseValue * (1 - i_trailingTakeProfitPercentageOffset)
shortTrailingTakeProfitOffsetFloat = shortTmpTtpBaseValue - shortTmpTtpBottomValue
float shortTrailingTakeProfitOffsetTick = floor (shortTrailingTakeProfitOffsetFloat / syminfo.mintick)

if i_enableTrailingTakeProfit
    longTrailingTakeProfitPrice := positionPrice * (1 + i_trailingTakeProfitPercentageTrigger)
    longTrailingTakeProfitOffset := longTrailingTakeProfitOffsetTick
    shortTrailingTakeProfitPrice := positionPrice * (1 - i_trailingTakeProfitPercentageTrigger)
    shortTrailingTakeProfitOffset := shortTrailingTakeProfitOffsetTick
else
    longTrailingTakeProfitPrice := na
    longTrailingTakeProfitOffset := na
    shortTrailingTakeProfitPrice := na
    shortTrailingTakeProfitOffset := na
// Quick Paste - END

// This might trigger additional close orders than needed in zignaly
// Better close an existing order twice than regreting zignaly not having closed it.

tmpOrderComment := f_getOrderComment("close", strategy.long, f_getZignalyLongCloseAlertMessage())
strategy.exit("[SL/TP]", "[B]", stop= i_enableStopLoss ? LongStopLoss : na, limit= i_enableTakeProfit ? LongTakeProfit : na, trail_price= i_enableTrailingTakeProfit ? longTrailingTakeProfitPrice : na, trail_offset = i_enableTrailingTakeProfit ? longTrailingTakeProfitOffset : na, alert_message= i_enableZignalyAlert ? f_getZignalyLongCloseAlertMessage() : na, comment=tmpOrderComment)
tmpOrderComment := f_getOrderComment("close", strategy.short, f_getZignalyShortCloseAlertMessage())
strategy.exit("[SL/TP]", "[S]", stop= i_enableStopLoss ? ShortStopLoss : na, limit= i_enableTakeProfit ? ShortTakeProfit : na, trail_price= i_enableTrailingTakeProfit ? shortTrailingTakeProfitPrice : na, trail_offset = i_enableTrailingTakeProfit ? shortTrailingTakeProfitOffset : na, alert_message= i_enableZignalyAlert ? f_getZignalyShortCloseAlertMessage() : na, comment=tmpOrderComment)

// Handle STOP LOSS (and similar) order exits - END

// Strategy Body - END