Ruckard QN OBVOsc A002

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © ruckard

//@version=5

// Current version: v20220228 ( A002 )
// Tradingview Public description - BEGIN
// 
// This strategy uses two emas based on an OBV oscillator in order to decide going long or short.
// This specific strategy also includes Risk Management.
// 
// It was originally tested at XRPUSDT pair and 1H timeframe.
//
// Before using this documentation it's recommended that you:
// [LIST]
// [*] Use default TradingView strategy script or another script and setup its associated alert manually. Just make the alert pop-up in the screen.
// [*] Create a 'Copy-Trader provider' (or Signal Provider) in Zignaly and send signals to it either thanks to your browser or with some basic programming.
// [/LIST]

// [B]SETTINGS[/B]
// [B]__ SETTINGS - Capital[/B]
// [LIST]
// [*] (CAPITAL) Capital quote invested per order in USDT units {100.0}. This setting is only used when '(ZIG) Provider type' is set to 'Signal Provider'.
// [*] (CAPITAL) Capital percentage invested per order (%) {25.0}. This setting is only used when '(ZIG) Provider type' is set to 'Copy Trader Provider'.
// [/LIST]
// [B]__ SETTINGS - Misc[/B]
// [LIST]
// [*] (ZIG) Enable Alert message {True}: Whether to enable alert message or not.
// [*] (ZIG) Service Secret Key {MYSECRETKEY}: Your service secret key. You can find it in your service Edit tab.
// [*] (DEBUG) Enable debug on order comments {False}: Whether to show alerts on order comments or not.
// [*] Number of decimal digits for Prices {2}.
// [*] (DECIMAL) Maximum number of decimal for contracts {3}.
// [/LIST]
// [B]__ SETTINGS - Zignaly[/B]
// [LIST]
// [*] (ZIG) Integration type {TradingView only}: [b]Hybrid[/b]: Both TradingView and Zignaly handle take profit, trailing stops and stop losses. Useful if you are scared about TradingView not firing an alert. It might arise problems if TradingView and Zignaly get out of sync. [b]TradingView only[/b]: TradingView sends entry and exit orders to Zignaly so that Zignaly only buys or sells. Zignaly won't handle stop loss or other settings on its own.
// [*] (ZIG) Zignaly Alert Type {WebHook}: 'Email' or 'WebHook'.
// [*] (ZIG) Provider type {Profit Sharing Provider}: 'Profit Sharing Provider', 'Copy Trader Provider', or 'Signal Provider'. 'Copy Trader Provider' or 'Profit Sharing Provider' sends a percentage to manage. 'Signal Provider' sends a quote to manage.
// [*] (ZIG) Exchange {Zignaly}: 'Zignaly', 'Binance' or 'Kucoin'.
// [*] (ZIG) Exchange Type {Futures}: 'Spot' or 'Futures'.
// [*] (ZIG) Leverage {1}. Set it to '1' when '(ZIG) Exchange Type' is set to 'Spot'.
// [/LIST]
// [B]__ SETTINGS - Strategy[/B]
// [LIST]
// [*] (STRAT) Strategy Type: 'Long and Short', 'Long Only' or 'Short Only'.
// [*] (STRAT) Strategy Start Time {2021-01-01 00:00:00}: When to start the strategy if '(STRAT) Strategy Start Time forced?' setting is set to true.
// [*] (STRAT) Strategy Stop Time {2021-12-31 00:00:00}: When to stop the strategy if '(STRAT) Strategy Stop Time forced?' setting is set to true.
// [*] (STRAT) Strategy Start Time forced? {True}: Whether to start the strategy from a given point in time.
// [*] (STRAT) Strategy Stop Time forced? {False}: Whether to stop the strategy after a given point in time.
// [*] (STOPTAKE) Take Profit? {false}: Whether to enable Take Profit.
// [*] (STOPTAKE) Stop Loss? {True}: Whether to enable Stop Loss.
// [*] (TRAILING) Enable Trailing Take Profit (%) {True}: Whether to enable Trailing Take Profit.
// [*] (STOPTAKE) Take Profit % {3.0}: Take profit percentage. This setting is only used when '(STOPTAKE) Take Profit?' setting is set to true.
// [*] (STRAT) Risk/Reward Ratio % {1.5}. Take Profit is StopLoss times Risk/Reward Ratio set here.
// [*] (STOPTAKE) Stop Loss % {2.0}: Stop loss percentage. This setting is only used when '(STOPTAKE) Stop Loss?' setting is set to true.
// [*] (TRAILING) Trailing Take Profit Trigger (%) {2.5}: Trailing Stop Trigger Percentage. This setting is only used when '(TRAILING) Enable Trailing Take Profit (%)' setting is set to true.
// [*] (TRAILING) Trailing Take Profit as a percentage of Trailing Take Profit Trigger (%) {25.0}: Trailing Stop Distance Percentage. This setting is only used when '(TRAILING) Enable Trailing Take Profit (%)' setting is set to true.
// [*] (RECENT) Number of minutes to wait to open a new order after the previous one has been opened {6}.
// [/LIST]
// [B]____ SETTINGS - Risk Management [/B]
// [list]
// [*] (RISKM) Risk Management Type: 'Safe', 'Somewhat safe compound' or 'None'. '[b]Safe[/b]': Calculations are always done with the initial capital (1000) in mind. The maximum losses per trade/day/week/month are taken into account. '[b]Somewhat safe compound[/b]': Calculations are done with initial capital (1000) or a higher capital if it increases. The maximum losses per trade/day/week/month are taken into account. '[b]None[/b]': In each order all the current capital is gambled and only the default stop loss per order is taken into account. That means that the maximum losses per trade/day/week/month are not taken into account. [b]Default[/b]: 'Somewhat safe compound'.
// [*] (RISKM) Maximum loss per trade % {1.0}.
// [*] (RISKM) Maximum loss per day % {6.0}.
// [*] (RISKM) Maximum loss per week % {8.0}.
// [*] (RISKM) Maximum loss per month % {10.0}.
// [/list]

// [B]DEFAULT SETTINGS[/B]

// By default this strategy has been setup with these beginner settings:
// [LIST]
// [*] '(ZIG) Integration type' : TradingView only
// [*] '(ZIG) Provider type'    : 'Copy Trader Provider'
// [*] '(ZIG) Exchange'         : 'Binance'
// [*] '(ZIG) Exchange Type'    : 'Spot'
// [*] '(STRAT) Strategy Type'  : 'Long Only'
// [*] '(ZIG) Leverage'         : '1' (Or no leverage)
// [/LIST]
// but you can change those settings if needed.


// [B]FIRST STEP[/B]
// [LIST]
// [*] For both future or spot markets you should make sure to change '(ZIG) Zignaly Alert Type' to match either WebHook or Email. If you have a non paid account in TradingView as in October 2020 you would have to use Email which it's free to use.
// [/LIST]

// [B]RECOMMENDED SETTINGS[/B]
// [B]__ RECOMMENDED SETTINGS - Spot markets[/B]
// [LIST]
// [*] '(ZIG) Exchange Type'   setting should be set to 'Spot'
// [*] '(STRAT) Strategy Type' setting should be set to 'Long Only'
// [*] '(ZIG) Leverage'        setting should be set to '1'
// [/LIST]
// [B]__ RECOMMENDED SETTINGS - Future markets[/B]
// [LIST]
// [*] '(ZIG) Exchange Type'   setting should be set to 'Futures'
// [*] '(STRAT) Strategy Type' setting should be set to 'Long and Short'
// [*] '(ZIG) Leverage'        setting might be changed if desired.
// [/LIST]
// [B]__ RECOMMENDED SETTINGS - Signal Providers[/B]
// [LIST]
// [*] '(ZIG) Provider type'   setting should be set to 'Signal Provider'
// [*] '(CAPITAL) Capital quote invested per order in USDT units' setting might be changed if desired.
// [/LIST]
// [B]__ RECOMMENDED SETTINGS - Copy Trader Providers[/B]
// [LIST]
// [*] '(ZIG) Provider type'   setting should be set to 'Copy Trader Provider'
// [*] '(CAPITAL) Capital percentage invested per order (%)' setting might be changed if desired.
// [*] Strategy Properties setting: 'Initial Capital' might be changed if desired.
// [/LIST]

// [B]INTEGRATION TYPE EXPLANATION[/B]
// [LIST]
// [*] 'Hybrid': Both TradingView and Zignaly handle take profit, trailing stops and stop losses. Useful if you are scared about TradingView not firing an alert. It might arise problems if TradingView and Zignaly get out of sync.
// [*] 'TradingView only': TradingView sends entry and exit orders to Zignaly so that Zignaly only buys or sells. Zignaly won't handle stop loss or other settings on its own.
// [/LIST]

// [B]HOW TO USE THIS STRATEGY[/B]
// [LIST]
// [*] Beginner: Copy and paste the strategy and change it to your needs. Turn off '(DEBUG) Enable debug on order comments' setting.
// [*] Medium: Reuse functions and inputs from this strategy into your own as if it was a library.
// [*] Advanced: Check Strategy Tester. List of trades. Copy and paste the different suggested 'alert_message' variable contents to your script and change them to your needs.
// [*] Expert: You needed a way to pass data from TradingView script to the alert. Now you know it's the 'alert_message' variable. You can find several examples in the source code using the variable. You also have seen 'ALERTS SETUP' explanation below. An additional quick look at 'Strategy Tester', 'List of Trades' and you are ready to go.
// [/LIST]


// [B] ALERTS SETUP[/B]
// This is the important piece of information that allows you to connect TradingView to Zignaly in a semi-automatic manner.
// [B] __ ALERTS SETUP - WebHook[/B]
// [LIST]
// [*] Webhook URL: https : // zignaly . com / api / signals.php?key=MYSECRETKEY
// [*] Message: {{strategy.order.alert_message}}
// [/LIST]
// [B] __ ALERTS SETUP - Email[/B]
// [LIST]
// [*] Setup a new Hotmail account
// [*] Add it as an 'SMS email' in TradingView Profile settings page.
// [*] Confirm your own the email address
// [*] Create a rule in your Hotmail account that 'Redirects' (not forwards) emails to 'signals @ zignaly . email' when (1): 'Subject' includes 'Alert', (2): 'Email body' contains string 'MYZIGNALYREDIRECTTRIGGER' and (3): 'From' contains 'noreply @ tradingview . com'.
// [*] In 'More Actions' check: Send Email-to-SMS
// [*] Message: {{strategy.order.alert_message}}
// MYZIGNALYREDIRECTTRIGGER
// [/LIST]


// '(DEBUG) Enable debug on order comments' is turned on by default so that you can see in the Strategy Tester. List of Trades. The different orders alert_message that would have been sent to your alert. You might want to turn it off it some many letters in the screen is problem.

// [B]STRATEGY ADVICE[/B]
// [LIST]
// [*] If you turn on 'Take Profit' then turn off 'Trailing Take Profit'.
// [/LIST]
//
// [B]ZIGNALY SIDE ADVICE[/B]
// [LIST]
// [*] If you are a 'Signal Provider' make sure that 'Allow reusing the same signalId if there isn't any open position using it?' setting in the profile tab is set to true.
// [*] You can find your 'MYSECRETKEY' in your 'Copy Trader/Signal' provider Edit tab at 'Signal URL'.
// [/LIST]
//
// [B]ADDITIONAL ZIGNALY DOCUMENTATION[/B]
// This beginner's guide is quite basic and meant to be an introduction. Please read additional documentation to learn what you actually can do with Zignaly.
// [LIST]
// [*] docs . zignaly . com / signals / how-to -- How to send signals to Zignaly
// [*] help . zignaly . com / hc/en-us/categories/360002703720-Sending-Signals -- Sending zignals
// [/LIST]
//
// [B]FINAL REMARKS[/B]
// [LIST]
// [*] This strategy tries to match the Pine Script Coding Conventions as best as possible.
// [*] You can check my 'Ruckard TradingLatino' strategy for a more complex strategy that it's also integrated with Zignaly. Unfortunatley it does not use Pine Script Coding Conventions as much.
// [/LIST]

// Tradingview Public description - END

strategy('Ruckard QN OBVOsc A002', shorttitle='A002RQNOO', overlay=false, max_bars_back=5000, calc_on_order_fills=false, calc_on_every_tick=false, pyramiding=0, initial_capital=1000, slippage=1, commission_type=strategy.commission.percent, commission_value=0.04)

import ruckard/RiskManagementBeta/4 as rm
import ruckard/ZignalyBeta/13 as zig

// INPUTS - BEGIN

// Strategy - Inputs
i_enableZignalyAlert = input(true, '(ZIG) Enable Alert message {True}')
i_zignalyServiceSecretKey = input.string('MYSECRETKEY', '(ZIG) Service Secret Key {MYSECRETKEY}')
_ZIGHYBRIDINTEGRATION_ = 'Hybrid', _ZIGTVONLYINTEGRATION_ = 'TradingView only'
i_zignalyIntegrationTypePre = input.string(_ZIGTVONLYINTEGRATION_, '(ZIG) Integration type', options=[_ZIGTVONLYINTEGRATION_, _ZIGHYBRIDINTEGRATION_])
i_zignalyIntegrationType = (i_zignalyIntegrationTypePre == _ZIGHYBRIDINTEGRATION_) ? 'hybrid' : 'nonhybrid'
_ZIGSIGNALPROVIDER_ = 'Signal Provider', _ZIGCOPYTRADERPROVIDER_ = 'Profit Sharing/Copy Trader Provider'
i_zignalyProviderTypePre = input.string(_ZIGCOPYTRADERPROVIDER_, '(ZIG) Provider type', options=[_ZIGSIGNALPROVIDER_, _ZIGCOPYTRADERPROVIDER_])
i_zignalyProviderType = (i_zignalyProviderTypePre == _ZIGCOPYTRADERPROVIDER_) ? 'copytrader' : 'signalprovider'
L_S = 'Long and Short', _L_ = 'Long Only', _S_ = 'Short Only', _REVERSE_ = 'Reverse'
i_strategyType = input.string(_REVERSE_, '(STRAT) Strategy Type', options=[L_S, _L_, _S_, _REVERSE_])
i_strategyStartTime = input.time(timestamp('01 Jan 2021'), '(STRAT) Strategy Start Time {2021-01-01 00:00:00}')
i_strategyStopTime = input.time(timestamp('31 Dec 2021'), '(STRAT) Strategy Stop Time {2021-12-31 00:00:00}')
i_strategyStartTimeOn = input.bool(true, '(STRAT) Strategy Start Time forced? {True}')
i_strategyStopTimeOn = input.bool(false, '(STRAT) Strategy Stop Time forced? {False}')
// Order comments based debug
i_enableOrderCommentDebug = input.bool(false, title='(DEBUG) Enable debug on order comments {False}')
i_enableTakeProfit = input.bool(false, '(STOPTAKE) Take Profit? {false}')
i_enableStopLoss = input.bool(true, '(STOPTAKE) Stop Loss? {True}')
i_enableTrailingTakeProfit = input.bool(true, title='(TRAILING) Enable Trailing Take Profit (%) {True}')
i_enableBreakEven = input.bool(false, title='(BREAKEVEN) Enable Break Even (%) {False}')
i_enableRiskRewardRatio = input.bool(false, title='(STOPTAKE) Calculate Take Profit from R/R Ratio (%) {False}')
i_takeProfit = input.float(1.1, title='(STOPTAKE) Take Profit % {3.0}')
i_takeProfitPerOne = i_takeProfit / 100
i_positionRatio = input.float(1.5, title='(STRAT) Risk/Reward Ratio % {1.5}', minval=0.01)
i_stopLoss = input.float(7.0, title='(STOPTAKE) Stop Loss % {7.0}', minval=0.01) / 100
_SLConstant_ = 'Constant', _SLATR_ = 'ATR'
i_stopLossTypePre = input.string(_SLConstant_, '(STOPTAKE) Stop Loss type', options=[_SLConstant_, _SLATR_])
i_stopLossType = (i_stopLossTypePre == _SLConstant_) ? 'constant' : (i_stopLossTypePre == _SLATR_) ? 'atr' : ''
i_atrStopLossLength = input.int(14, minval = 1,  title = '(STOPTAKE) ATR Stop Loss Length [14]')
i_atrStopLossSource = input.source(close, title = '(STOPTAKE) ATR Stop Loss Source [close]')
i_atrStopLossMultiplier = input.float(1.5, title='(STOPTAKE) ATR Stop Loss Multiplier % {1.5}', minval=0.01)
i_obvLength = input.int(20,    title = '(STRAT) OBV Length {20}')
i_obvSource = input.source(close, title = '(STRAT) OBV Source {close}')
i_obvFastEMALength = input.int(12, title = '(STRAT) Fast EMA Length {12}')
i_obvSlowEMALength = input.int(26, title = '(STRAT) Slow EMA Length {26}')
i_obvShowEMAs = input.bool(true, title = '(PLOT) Show OBV EMAs {true}')
// Trailing Take Profit - Inputs
i_trailingTakeProfitPercentageTrigger = input.float(1.2, '(TRAILING) Trailing Take Profit Trigger (%) {2.5}', minval=0, step=0.01)
i_trailingTakeProfitPercentageTriggerPerOne = i_trailingTakeProfitPercentageTrigger * 0.01
i_trailingTakeProfitPercentageOffset = input.float(25.0, '(TRAILING) Trailing Take Profit as a percentage of Trailing Take Profit Trigger (%) {25.0}', minval=0, step=0.01)
i_trailingTakeProfitPercentageOffsetPerOne = i_trailingTakeProfitPercentageOffset * 0.01
// Break Even - Inputs
i_breakEvenTrigger = input.float(1.0, '(BREAKEVEN) Break Even Trigger (%) {1.0}', minval=0, step=0.01)
i_breakEvenTriggerPerOne = i_breakEvenTrigger * 0.01
i_breakEven = input.float(0.20, '(BREAKEVEN) Break Even Stop Loss (%) {0.20}', minval=0, step=0.01)
i_breakEvenPerOne = i_breakEven * 0.01
// Zignaly - Email (zignalye)
_ZIGNALYE_ = 'Email', _ZIGNALYW_ = 'WebHook'
i_zignalyAlertTypePre = input.string(_ZIGNALYW_, '(ZIG) Zignaly Alert Type {WebHook}', options=[_ZIGNALYW_, _ZIGNALYE_])
i_zignalyAlertType = (i_zignalyAlertTypePre == _ZIGNALYW_) ? 'webhook' : 'email'
_ZIGEXZIGNALY_ = 'Zignaly', _ZIGEXBINANCE_ = 'Binance', _ZIGEXKUCOIN_ = 'Kucoin'
i_zignalyExchange = input.string(_ZIGEXZIGNALY_, '(ZIG) Exchange {Zignaly}', options=[_ZIGEXZIGNALY_, _ZIGEXBINANCE_, _ZIGEXKUCOIN_])
_ZIGEXTYPESPOT_ = 'spot', _ZIGEXFUTURES_ = 'futures'
i_zignalyExchangeType = input.string(_ZIGEXFUTURES_, '(ZIG) Exchange Type {Futures}', options=[_ZIGEXFUTURES_, _ZIGEXTYPESPOT_])
i_zignalyLeverage = input.int(1, '(ZIG) Leverage {1}', minval=1, step=1, maxval=125)
var i_zignalyLeverage_str = str.tostring(i_zignalyLeverage)  // It needs to run only once
i_priceDecimalDigits = input.int(2, 'Number of decimal digits for Prices {2}', minval=0, maxval=10, step=1)
// Decimal - Inputs
i_contractMaximumDecimalNumber = input.int(3, title='(DECIMAL) Maximum number of decimal for contracts {3}', minval=0)
i_tooRecentMinutesNumber = input.int(0, '(RECENT) Number of minutes to wait to open a new order after the previous one has been opened {0}', minval=0, maxval=100, step=1)
i_CapitalQuote = input.float(100.0, title='(CAPITAL) Capital quote invested per order in USDT units {100.0}')
i_CapitalPercentage = input.float(25.0, title='(CAPITAL) Capital percentage invested per order (%) {25.0}', minval=0, step=0.01) * 0.01
// Risk Management - Inputs
_SAFE_ = 'Safe', _SCOMPOUND_ = 'Somewhat safe compound', _NONE_ = 'None', _CUSTOM_ = 'Custom', _FORCED_ = 'Forced'
i_riskManagementTypePre = input.string(_SCOMPOUND_, '(RISKM) Risk Management Type', options=[_SAFE_, _SCOMPOUND_, _NONE_, _CUSTOM_, _FORCED_])
i_riskManagementType = (i_riskManagementTypePre == _SAFE_) ? 'SAFE' : (i_riskManagementTypePre == _SCOMPOUND_) ? 'SCOMPOUND' : (i_riskManagementTypePre == _NONE_) ? 'NONE' : (i_riskManagementTypePre == _CUSTOM_) ? 'CUSTOM' : 'FORCED'
i_riskManagementMaximumLossPerTrade = input.float(1.0, title='(RISKM) Maximum loss per trade % {1.0}') / 100
i_riskManagementMaximumLossPerDay = input.float(6.0, title='(RISKM) Maximum loss per day % {6.0}') / 100
i_riskManagementMaximumLossPerWeek = input.float(8.0, title='(RISKM) Maximum loss per week % {8.0}') / 100
i_riskManagementMaximumLossPerMonth = input.float(10.0, title='(RISKM) Maximum loss per month % {10.0}') / 100

// INPUTS - END



// Strategy - INIT - BEGIN

string stringNA = na

onStartTimeInterval = (not i_strategyStartTimeOn) or (time >= i_strategyStartTime)
offStopTimeInterval = (i_strategyStopTimeOn) and (time > i_strategyStopTime)

// order Stop Loss
float orderStopLossPerOne = na
float orderStopLoss = orderStopLossPerOne

// Dynamic Trailing Take Profit - Variables

var int buyOrderOpenBarIndex = na
var int sellOrderOpenBarIndex = na

// Breakeven accounting - Variables
var bool breakEvenTriggered = false
var bool breakEvenNeedsTrigger = false

// Handle to avoid two long and short orders being too next to each other
var bool insideABuyOrder = false
var bool insideASellOrder = false

var int lastOrderOpenBarTime = na

// Handle recalculate after Stop Loss / Take Profit order
if (strategy.position_size == 0.0)
    insideABuyOrder := false
    insideASellOrder := false
else
    lastOrderOpenBarTime := time_close

if (strategy.position_size > 0.0)
    insideABuyOrder := true
    insideASellOrder := false
if (strategy.position_size < 0.0)
    insideABuyOrder := false
    insideASellOrder := true

// Zignaly
exchangeTickerID = syminfo.ticker

var string tmpOrderComment = na
var string tmpOrderAlertMessage = na

var int i_tooRecentMinutesNumber_ms = i_tooRecentMinutesNumber * 60 * 1000 // Convert minutes into milliseconds only once

// Strategy - INIT - END

// FUNCTIONS - BEGIN

// Decimals - Functions
f_getContractMultiplier(_contractMaximumDecimalNumber) =>
    _contractMultiplier = 1
    if (_contractMaximumDecimalNumber == 0)
        _contractMultiplier // Return 1
    else
        for _counter = 1 to _contractMaximumDecimalNumber
            _contractMultiplier:= _contractMultiplier * 10
        _contractMultiplier

// Order comment - Functions - BEGIN

f_getOrderComment(_typeOrder, _side, _alertMessage) =>
    // Dependencies: i_enableOrderCommentDebug (initialized in inputs).

    // TODO: Add descriptive comments
    // _typeOrder="entry" or _typeOrder="close"
    // _side: true means long ; false means short ; We can use strategy.long or strategy.short as true and false aliases
    // _alertMessage
    var string _orderComment = ""
    
    if (i_enableOrderCommentDebug)
        _orderComment := _alertMessage
    else
        // TODO: Use human explanations instead of default order comment value (na)
        _orderComment := na
        
    _orderComment

// Order comment - Functions - END

// Too recent orders functions

f_getTooRecentOrderNotOpenAdvice () =>
    // Dependencies: i_tooRecentMinutesNumber_ms
    // Dependencies: lastOrderOpenBarTime

    // Condition 1: The order was open
    // Condition 2: The order was long or short
    // Condition 3: Time since order was last open is smaller than minimum between orders
    // Returns boolean
    bool _isTooRecent =  ((time_close) <= (lastOrderOpenBarTime + i_tooRecentMinutesNumber_ms))

    bool _tooRecentOrderBuyNotOpenAdvice = na
    if (na(lastOrderOpenBarTime))
        _tooRecentOrderBuyNotOpenAdvice := false
    else
        _tooRecentOrderBuyNotOpenAdvice := _isTooRecent
    _tooRecentOrderBuyNotOpenAdvice

// FUNCTIONS - END


// Strategy Body - BEGIN


// Simple Logic to go LONG/LONG or go SHORT/SHORT - BEGIN
obv      = math.sum(volume * math.sign(ta.change(i_obvSource)), i_obvLength)
obvOscillator  = obv / math.sum(volume, i_obvLength)
obvFastEMA = ta.ema(obvOscillator, i_obvFastEMALength)
obvSlowEMA = ta.ema(obvOscillator, i_obvSlowEMALength)

longCondition = ta.crossover(obvFastEMA, obvSlowEMA)
shortCondition = ta.crossunder(obvFastEMA, obvSlowEMA)
// Simple Logic to go LONG/LONG or go SHORT/SHORT - END

plot(0, color = color.gray, title = "0 line")
plot(obvOscillator, color = color.blue, title = "OBV Oscillator", linewidth = 2)
plot(i_obvShowEMAs ? obvFastEMA : na, color = color.orange, title = "OBV Fast EMA", linewidth = 2)
plot(i_obvShowEMAs ? obvSlowEMA : na, color = color.green , title = "OBV Slow EMA", linewidth = 2)

// Position price calculation - BEGIN
float positionPrice = na
if (insideASellOrder or insideABuyOrder)
    positionPrice := strategy.position_avg_price
else
    positionPrice := close
    // Make sure to reset breakeven triggered if we are not in an order
    breakEvenTriggered := false
    breakEvenNeedsTrigger := false
    
// Position price calculation - END

tooRecentOrderNotOpenAdvice = f_getTooRecentOrderNotOpenAdvice ()

// Decide if we are going to LONG/Go LONG - BEGIN
PRE_LONG = false
if (i_tooRecentMinutesNumber == 0)
    PRE_LONG := onStartTimeInterval and longCondition
else
    PRE_LONG := onStartTimeInterval and longCondition and (not tooRecentOrderNotOpenAdvice)

// LONG = PRE_LONG[1] and PRE_LONG // Wait for confirmation
LONG = PRE_LONG // Do not wait for confirmation

// Decide if we are going to LONG/Go LONG - END

// Decide if we are going to SHORT/Go SHORT - BEGIN
PRE_SHORT = false
if (i_tooRecentMinutesNumber == 0)
    PRE_SHORT := onStartTimeInterval and shortCondition
else
    PRE_SHORT := onStartTimeInterval and shortCondition and (not tooRecentOrderNotOpenAdvice)

// SHORT = PRE_SHORT[1] and PRE_SHORT // Wait for confirmation
SHORT = PRE_SHORT // Do not wait for confirmation

// Decide if we are going to SHORT/Go SHORT - END

// Decide if a LONG/LONG entry should be closed - BEGIN
LONG_CLOSE = true
LONG_CLOSE := offStopTimeInterval or shortCondition

// Let's make sure LONG does not trigger if LONG_CLOSE would tell us to close the LONG
if LONG_CLOSE
    LONG := false
// Decide if a LONG/LONG entry should be closed - END

// Decide if a SHORT/SHORT entry should be closed - BEGIN
SHORT_CLOSE = true
SHORT_CLOSE := offStopTimeInterval or longCondition

// Let's make sure SHORT does not trigger if SHORT_CLOSE would tell us to close the SHORT
if SHORT_CLOSE
    SHORT := false
// Decide if a SHORT/SHORT entry should be closed - END

// orderStopLoss is just here just in case
// we implement i_longStopLoss and i_shortStopLoss
// in the future
atrLongStopLossPrice = i_atrStopLossSource - (ta.atr(i_atrStopLossLength) * i_atrStopLossMultiplier)
atrShortStopLossPrice = i_atrStopLossSource + (ta.atr(i_atrStopLossLength) * i_atrStopLossMultiplier)
if LONG
    if ( i_stopLossType == 'constant' )
        orderStopLossPerOne := i_stopLoss
    else if ( i_stopLossType == 'atr' )
        orderStopLossPerOne := (close - atrLongStopLossPrice) / close

    orderStopLoss := orderStopLossPerOne * 100
else
    if ( i_stopLossType == 'constant' )
        orderStopLossPerOne := i_stopLoss
    else if ( i_stopLossType == 'atr' )
        orderStopLossPerOne := (atrShortStopLossPrice - close) / atrShortStopLossPrice

    orderStopLoss := orderStopLossPerOne * 100

var float LongBreakEvenTrigger = na
var float ShortBreakEvenTrigger = na

if ((not insideABuyOrder[1]) and insideABuyOrder)
    LongBreakEvenTrigger := positionPrice * (1 + i_breakEvenTriggerPerOne)
if ((not insideASellOrder[1]) and insideASellOrder)
    ShortBreakEvenTrigger := positionPrice * (1 - i_breakEvenTriggerPerOne)

if insideABuyOrder
    if (high >= LongBreakEvenTrigger)
        breakEvenNeedsTrigger := true
if insideASellOrder
    if (low <= ShortBreakEvenTrigger)
        breakEvenNeedsTrigger := true

if (insideABuyOrder and LONG_CLOSE)
    breakEvenTriggered := false
    breakEvenNeedsTrigger := false
if (insideASellOrder and SHORT_CLOSE)
    breakEvenTriggered := false
    breakEvenNeedsTrigger := false

// How much to LONG/GO LONG/SHORT/GO SHORT - BEGIN

// Custom take profit and stop loss
var float LongStopLoss = na
var float ShortStopLoss = na

// Initial StopLoss value based on last closed candle
if (not insideABuyOrder)
    LongStopLoss := close * (1 - orderStopLossPerOne)
if (not insideASellOrder)
    ShortStopLoss := close * (1 + orderStopLossPerOne)

// Final StopLoss value based on actual position price
if ((not insideABuyOrder[1]) and (insideABuyOrder))
    LongStopLoss := positionPrice * (1 - orderStopLossPerOne)
if ((not insideASellOrder[1]) and (insideASellOrder))
    ShortStopLoss := positionPrice * (1 + orderStopLossPerOne)

// Override StopLoss with BreakEven if needed
if ( i_enableBreakEven and insideABuyOrder and (not breakEvenTriggered) and breakEvenNeedsTrigger )
    LongStopLoss := positionPrice * (1 + i_breakEvenPerOne)
if ( i_enableBreakEven and insideASellOrder and (not breakEvenTriggered) and breakEvenNeedsTrigger )
    ShortStopLoss := positionPrice * (1 - i_breakEvenPerOne)

var float takeProfit = na
var float takeProfitPerOne = na

if i_enableRiskRewardRatio
    takeProfit := orderStopLoss * i_positionRatio
    takeProfitPerOne := takeProfit / 100
else
    takeProfit := i_takeProfit
    takeProfitPerOne := i_takeProfitPerOne

var float LongTakeProfit = na
var float ShortTakeProfit = na

// Initial TakeProfit value based on last closed candle
if (not insideABuyOrder)
    LongTakeProfit := close * (1 + takeProfitPerOne)
if (not insideASellOrder)
    ShortTakeProfit := close * (1 - takeProfitPerOne)

// Final TakeProfit value based on actual position price
if ((not insideABuyOrder[1]) and (insideABuyOrder))
    LongTakeProfit := positionPrice * (1 + takeProfitPerOne)
if ((not insideASellOrder[1]) and (insideASellOrder))
    ShortTakeProfit := positionPrice * (1 - takeProfitPerOne)

float entryQuantity = na
float currentCapital = strategy.initial_capital + strategy.netprofit

var float customQuantity = na


if (i_zignalyProviderType == 'copytrader')
    entryQuantity := i_CapitalPercentage * currentCapital
else // _ZIGSIGNALPROVIDER_
    entryQuantity := i_CapitalQuote

if ( (i_riskManagementType == 'CUSTOM') or (i_riskManagementType == 'FORCED') )
    customQuantity := entryQuantity
else
    customQuantity := na

if (i_zignalyProviderType == 'copytrader') // Risk management is only implemented for CopyTrader Providers
    var currentDayCapital = 0.0
    var currentDay = 0
    var currentWeekCapital = 0.0
    var currentWeek = 0
    var currentMonthCapital = 0.0
    var currentMonth = 0

    currentDay := rm.getCurrentDay ()
    currentWeek := rm.getCurrentWeek ()
    currentMonth := rm.getCurrentMonth ()

    [__entryQuantity, __currentDay, __currentDayCapital, __currentWeek, __currentWeekCapital, __currentMonth, __currentMonthCapital] = rm.advisedEntryQuantity (currentCapital, currentDay, currentDayCapital, currentWeek, currentWeekCapital, currentMonth, currentMonthCapital, i_riskManagementMaximumLossPerDay, i_riskManagementMaximumLossPerWeek, i_riskManagementMaximumLossPerMonth, i_riskManagementMaximumLossPerTrade, orderStopLossPerOne, i_riskManagementType, customQuantity)

    entryQuantity := __entryQuantity
    currentDayCapital := __currentDayCapital
    currentWeekCapital := __currentWeekCapital
    currentMonthCapital := __currentMonthCapital

float entryQuantityContractsReducer = 0.99

contractMultiplier = f_getContractMultiplier(i_contractMaximumDecimalNumber)

// We assume the current price is current bar close

entryQuantityContracts = (math.floor(((entryQuantity / close) * entryQuantityContractsReducer) * contractMultiplier) / contractMultiplier)
entryQuantityContractsUSDT = entryQuantityContracts * (close)

// How much to LONG/GO LONG/SHORT/GO SHORT - END


// GO LONG only logic - BEGIN

var float tmpPositionBeforeOpeningOrder = na

if (i_strategyType == _L_)
    if LONG
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        if not (i_enableBreakEven and breakEvenNeedsTrigger and (not(breakEvenTriggered)))
            tmpOrderAlertMessage := zig.longEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, integration=i_zignalyIntegrationType, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, partial=false)
            tmpOrderComment := f_getOrderComment("entry", strategy.long, tmpOrderAlertMessage)
            strategy.entry("[L]", strategy.long, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        else // Update Breakeven
            tmpOrderAlertMessage := zig.updateLongEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, breakEvenPercentage = i_breakEvenTrigger, partial=false)
            // tmpOrderComment := f_getOrderComment("entry", strategy.long, tmpOrderAlertMessage)
            alert(message=i_enableZignalyAlert ? tmpOrderAlertMessage : na)
            breakEvenTriggered := true
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            buyOrderOpenBarIndex := bar_index + 1
        0 // Workaround for making every if branch to return the same type of value
    else if LONG_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.long, zig.longExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false))
        strategy.close("[L]", alert_message=i_enableZignalyAlert ? zig.longExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false) : na, comment=tmpOrderComment)
        0 // Workaround for making every if branch to return the same type of value
// GO LONG only logic - END

// GO SHORT only logic - BEGIN
if (i_strategyType == _S_)
    if SHORT
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        if not (i_enableBreakEven and breakEvenNeedsTrigger and (not(breakEvenTriggered)))
            tmpOrderAlertMessage := zig.shortEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, integration=i_zignalyIntegrationType, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, partial=false)
            tmpOrderComment := f_getOrderComment("entry", strategy.short, tmpOrderAlertMessage)
            strategy.entry("[S]", strategy.short, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        else // Update Breakeven
            tmpOrderAlertMessage := zig.updateShortEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, breakEvenPercentage = i_breakEvenTrigger, partial=false)
            // tmpOrderComment := f_getOrderComment("entry", strategy.short, tmpOrderAlertMessage)
            alert(message=i_enableZignalyAlert ? tmpOrderAlertMessage : na)
            breakEvenTriggered := true
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            sellOrderOpenBarIndex := bar_index + 1
        0 // Workaround for making every if branch to return the same type of value
    else if SHORT_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.short, zig.shortExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false))
        strategy.close("[S]", alert_message=i_enableZignalyAlert ? zig.shortExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false) : na, comment=tmpOrderComment)
        0 // Workaround for making every if branch to return the same type of value
// GO SHORT only logic - END

// GO LONG and SHORT logic - BEGIN
if (i_strategyType == L_S)
// Asumption: Above we have:
// if LONG_CLOSE
//    LONG := false
// if SHORT_CLOSE
//    SHORT := false

    // LONG and SHORT cannot be true at the same time
    // Anyways we will take it into account
    if (LONG == true) and (SHORT == true)
        LONG := true
        SHORT := false
        SHORT_CLOSE := true

    if LONG
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        if not (i_enableBreakEven and breakEvenNeedsTrigger and (not(breakEvenTriggered)))
            tmpOrderAlertMessage := zig.longEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, integration=i_zignalyIntegrationType, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, partial=false)
            tmpOrderComment := f_getOrderComment("entry", strategy.long, tmpOrderAlertMessage)
            strategy.entry("[L]", strategy.long, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        else // Update Breakeven
            tmpOrderAlertMessage := zig.updateLongEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, breakEvenPercentage = i_breakEvenTrigger, partial=false)
            // tmpOrderComment := f_getOrderComment("entry", strategy.long, tmpOrderAlertMessage)
            alert(message=i_enableZignalyAlert ? tmpOrderAlertMessage : na)
            breakEvenTriggered := true
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            buyOrderOpenBarIndex := bar_index + 1
    if LONG_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.long, zig.longExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false))
        strategy.close("[L]", alert_message=i_enableZignalyAlert ? zig.longExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false) : na, comment=tmpOrderComment)
    if SHORT
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        if not (i_enableBreakEven and breakEvenNeedsTrigger and (not(breakEvenTriggered)))
            tmpOrderAlertMessage := zig.shortEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, integration=i_zignalyIntegrationType, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, partial=false)
            tmpOrderComment := f_getOrderComment("entry", strategy.short, tmpOrderAlertMessage)
            strategy.entry("[S]", strategy.short, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        else // Update Breakeven
            tmpOrderAlertMessage := zig.updateShortEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, breakEvenPercentage = i_breakEvenTrigger, partial=false)
            // tmpOrderComment := f_getOrderComment("entry", strategy.short, tmpOrderAlertMessage)
            alert(message=i_enableZignalyAlert ? tmpOrderAlertMessage : na)
            breakEvenTriggered := true
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            sellOrderOpenBarIndex := bar_index + 1
    if SHORT_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.short, zig.shortExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false))
        strategy.close("[S]", alert_message=i_enableZignalyAlert ? zig.shortExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false) : na, comment=tmpOrderComment)
// GO LONG and SHORT logic - END

// Reverse logic - BEGIN
if (i_strategyType == _REVERSE_)
// Asumption: Above we have:
// if LONG_CLOSE
//    LONG := false
// if SHORT_CLOSE
//    SHORT := false

    // LONG and SHORT cannot be true at the same time
    // Anyways we will take it into account
    if (LONG == true) and (SHORT == true)
        LONG := true
        SHORT := false

    if (LONG and (not LONG_CLOSE))
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        if not (i_enableBreakEven and breakEvenNeedsTrigger and (not(breakEvenTriggered)))
            tmpOrderAlertMessage := zig.reverseLongEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, integration=i_zignalyIntegrationType, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, partial=false)
            tmpOrderComment := f_getOrderComment("entry", strategy.long, tmpOrderAlertMessage)
            strategy.entry("[L]", strategy.long, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        else // Update Breakeven
            tmpOrderAlertMessage := zig.updateLongEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, breakEvenPercentage = i_breakEvenTrigger, partial=false)
            // tmpOrderComment := f_getOrderComment("entry", strategy.long, tmpOrderAlertMessage)
            alert(message=i_enableZignalyAlert ? tmpOrderAlertMessage : na)
            breakEvenTriggered := true
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            buyOrderOpenBarIndex := bar_index + 1
    if LONG_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.long, zig.longExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false))
        strategy.close("[L]", alert_message=i_enableZignalyAlert ? zig.longExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false) : na, comment=tmpOrderComment)
    if (SHORT and (not SHORT_CLOSE))
        tmpPositionBeforeOpeningOrder := strategy.position_avg_price
        if not (i_enableBreakEven and breakEvenNeedsTrigger and (not(breakEvenTriggered)))
            tmpOrderAlertMessage := zig.reverseShortEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, integration=i_zignalyIntegrationType, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, partial=false)
            tmpOrderComment := f_getOrderComment("entry", strategy.short, tmpOrderAlertMessage)
            strategy.entry("[S]", strategy.short, qty=entryQuantityContracts, alert_message=i_enableZignalyAlert ? tmpOrderAlertMessage : na, comment=tmpOrderComment)
        else // Update Breakeven
            tmpOrderAlertMessage := zig.updateShortEntry(key=i_zignalyServiceSecretKey,positionSizeQuote=entryQuantityContractsUSDT, currentCapital=currentCapital, alertType=i_zignalyAlertType, stopLoss=i_enableStopLoss, takeProfit=i_enableTakeProfit, takeProfitPercentage1=takeProfit, trailingStopLoss=i_enableTrailingTakeProfit, trailingStopTriggerPercentage=i_trailingTakeProfitPercentageTrigger, trailingStopDistancePercentage=i_trailingTakeProfitPercentageOffset, priceDecimalDigits=i_priceDecimalDigits, exchange=i_zignalyExchange, exchangeAccountType=i_zignalyExchangeType, pair=exchangeTickerID, leverage=i_zignalyLeverage, providerType=i_zignalyProviderType, stopLossPercentage=orderStopLoss, signalId=stringNA, breakEvenPercentage = i_breakEvenTrigger, partial=false)
            // tmpOrderComment := f_getOrderComment("entry", strategy.short, tmpOrderAlertMessage)
            alert(message=i_enableZignalyAlert ? tmpOrderAlertMessage : na)
            breakEvenTriggered := true
        if (na(tmpPositionBeforeOpeningOrder)) // bar_index should only be saved when there is no order opened
            sellOrderOpenBarIndex := bar_index + 1
    if SHORT_CLOSE
        tmpOrderComment := f_getOrderComment("close", strategy.short, zig.shortExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false))
        strategy.close("[S]", alert_message=i_enableZignalyAlert ? zig.shortExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false) : na, comment=tmpOrderComment)
// Reverse logic - END

// Handle STOP LOSS (and similar) order exits - BEGIN

// Quick Paste - BEGIN
float longTrailingTakeProfitPrice = na
float longTrailingTakeProfitPoints = na
float longTrailingTakeProfitOffset = na
float shortTrailingTakeProfitPrice = na
float shortTrailingTakeProfitPoints = na
float shortTrailingTakeProfitOffset = na

// Calculate trailing_take_profit_offset based on tick units
longTmpTtpBaseValue = positionPrice * (1 + i_trailingTakeProfitPercentageTriggerPerOne)
longTmpTtpTop_value = longTmpTtpBaseValue * (1 + i_trailingTakeProfitPercentageOffsetPerOne)
longTrailingTakeProfitOffsetFloat = longTmpTtpTop_value - longTmpTtpBaseValue
float longTrailingTakeProfitOffsetTick = math.floor (longTrailingTakeProfitOffsetFloat / syminfo.mintick)

shortTmpTtpBaseValue = positionPrice * (1 - i_trailingTakeProfitPercentageTriggerPerOne)
shortTmpTtpBottomValue = shortTmpTtpBaseValue * (1 - i_trailingTakeProfitPercentageOffsetPerOne)
shortTrailingTakeProfitOffsetFloat = shortTmpTtpBaseValue - shortTmpTtpBottomValue
float shortTrailingTakeProfitOffsetTick = math.floor (shortTrailingTakeProfitOffsetFloat / syminfo.mintick)

if i_enableTrailingTakeProfit
    longTrailingTakeProfitPrice := positionPrice * (1 + i_trailingTakeProfitPercentageTriggerPerOne)
    longTrailingTakeProfitOffset := longTrailingTakeProfitOffsetTick
    shortTrailingTakeProfitPrice := positionPrice * (1 - i_trailingTakeProfitPercentageTriggerPerOne)
    shortTrailingTakeProfitOffset := shortTrailingTakeProfitOffsetTick
else
    longTrailingTakeProfitPrice := na
    longTrailingTakeProfitOffset := na
    shortTrailingTakeProfitPrice := na
    shortTrailingTakeProfitOffset := na
// Quick Paste - END

// This might trigger additional close orders than needed in zignaly
// Better close an existing order twice than regreting zignaly not having closed it.

tmpOrderComment := f_getOrderComment("close", strategy.long, zig.longExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false))
strategy.exit("[SL/TP]", "[L]", stop= i_enableStopLoss ? LongStopLoss : na, limit= i_enableTakeProfit ? LongTakeProfit : na, trail_price= i_enableTrailingTakeProfit ? longTrailingTakeProfitPrice : na, trail_offset = i_enableTrailingTakeProfit ? longTrailingTakeProfitOffset : na, alert_message= i_enableZignalyAlert ? zig.longExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false) : na, comment=tmpOrderComment)
tmpOrderComment := f_getOrderComment("close", strategy.short, zig.shortExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false))
strategy.exit("[SL/TP]", "[S]", stop= i_enableStopLoss ? ShortStopLoss : na, limit= i_enableTakeProfit ? ShortTakeProfit : na, trail_price= i_enableTrailingTakeProfit ? shortTrailingTakeProfitPrice : na, trail_offset = i_enableTrailingTakeProfit ? shortTrailingTakeProfitOffset : na, alert_message= i_enableZignalyAlert ? zig.shortExit(key=i_zignalyServiceSecretKey,exchange=i_zignalyExchange,exchangeAccountType=i_zignalyExchangeType,pair=exchangeTickerID,leverage=i_zignalyLeverage,alertType=i_zignalyAlertType, signalId=stringNA, partial=false) : na, comment=tmpOrderComment)

// Handle STOP LOSS (and similar) order exits - END

// Strategy Body - END